Bose VIDEOBAR VB1 Mode D'emploi page 34

OPERATION
Starting a Meeting
Note: The host computer must have the latest DisplayLink® driver installed,
and the VB1 must have its DisplayLink setting enabled (disabled by default)
for the HDMI output to function. Visit displaylink.com/downloads to
download the latest driver. Enable or disable the DisplayLink setting using
the Videobar Configuration app or WebUI or Videobar Administration app
(see Software Applications (Page 23)).
To start a meeting using the VB1:
1. Connect the included USB cable between the VB1 and your computer.
Use the included USB C-to-A adapter, if needed.
2. Start the meeting in your preferred meeting software.
3. In the device settings of your meeting software, select Videobar VB1 as
the device for the microphone, speakers, and camera.
To make a call using the VB1 as a speakerphone:
1. Press the Bluetooth button on the side of the VB1 (or press and hold the
Bluetooth button on the remote control for 3 seconds) to put the VB1
into pairing mode.
2. On your mobile device, scan for available Bluetooth devices and select
the VB1.
3. Make a call from your mobile device. The audio will be automatically
routed from your mobile device to the VB1 speakers and microphones.
OP ER ATI O N
|
3 4 E N