Bose VIDEOBAR VB1 Mode D'emploi page 24

Videobar Configuration App and WebUI
To download and install the Videobar Configuration app on your computer:
1. On your computer, visit boseprofessional.com/VB1.
2. Download and install the Videobar Configuration Software app.
To access and use the Videobar Configuration app to configure the VB1:
1. Connect your computer to the USB-C port on the VB1.
2. Open the Videobar Configuration app.
3. To access the Administrator configuration settings to configure the
VB1, Click the Administrator icon in the navigation panel and enter the
factory default password:
Note: We recommend changing the password after gaining access.
To access and use the browser-based Videobar Configuration WebUI to
configure the VB1 over a network connection:
1. Connect your computer and the VB1 to the same network.
2. Enter the IP address of the VB1 into the address bar of a web browser
on your computer, and press Enter. (You can determine the IP address
of the VB1 using the Videobar Configuration app over USB or using the
Videobar Administration app which automatically discovers VB1s on the
network.) The Videobar Configuration WebUI will open.
Note: On some browsers, you may see a security warning like this:
This is normal and not a security risk. Click Advanced. (If you are ever
unsure about performing an operation on your computer, in a web
browser, etc., check with your IT/system administrator first.)
SOF T WA R E A P P L I CAT I O NS
Bose123!
|
2 4 E N