Bose VIDEOBAR VB1 Mode D'emploi page 12

SETUP
General Mounting Guidelines
Do NOT place the VB1 on its front, back or top when in use.
Do NOT place any objects on top of the VB1.
Avoid placing the VB1 near air conditioning vents, heaters or radiators,
fans, or other sources of noise or vibrations.
To avoid wireless interference, keep other wireless equipment 0.3–
0.9 m (1–3 ft) away from the VB1. Place the VB1 outside and away from
metal cabinets, other audio/video components and direct heat sources.
Make sure there is an AC (mains) outlet nearby.
Place the VB1 directly below (preferred) or above your TV with the
grille facing into the room.
For best sound quality, do NOT place the VB1 in an enclosed cabinet or
diagonally in a corner.
Make sure the seating area of all meeting participants fits within the
camera's field of view (FOV). All meeting participants must be in
the FOV in order for the autoframing feature to work properly (see
Enabling/Disabling Autoframing (Page 37)).
The FOV of the VB1 camera is 115° horizontal, 81° vertical.
Make sure the meeting room can be well lit during a meeting.
115°
SETU P
|
1 2 E N
81°