Bose VIDEOBAR VB1 Mode D'emploi page 30

Remote Control
The Videobar VB1 includes an infrared remote control that enables you to
adjust camera and volume settings, mute the microphones, and put the VB1
in Bluetooth pairing mode.
Note: All remote-control functions are also available in the software apps
that enable you to configure the Videobar VB1. See Software Applications
(Page 23) for more information.
1 2
4
5
3
4
6
7
8 9
P R OD UC T D ETA I L S
1. Mute: Mute/unmute the VB1 microphones.
2. Bluetooth : Press and hold for 3 seconds to enter
pairing mode. If already paired to a device, press
and hold to disconnect.
3. Camera Pan: Press to pan the camera left and
right (< or >), or press and hold for continuous
3
adjustment.
4. Camera Tilt: Press to tilt the camera up and
6
down (Λ or V), or press and hold for continuous
adjustment.
5. Home Preset: Return Pan, Tilt, and Zoom (PTZ)
camera settings to the Home position. The
Home position can be changed in the Videobar
Configuration app.
6. Presets 1 & 2: Press to select Preset 1 or 2 for the
camera. Press and hold to save the current Pan,
Tilt, and Zoom (PTZ) camera settings as Preset 1
or 2.
7. Autoframe: Turn autoframing on/off. When
on, the pan, tilt, and zoom (PTZ) camera
settings will adjust automatically to include all
participants in the field of view at all times.
8. Volume: Raise or lower volume (+ or −).
9. Camera Zoom: Increase or decrease (+ or −) the
zoom ratio of the camera.
|
3 0 E N