Yamaha WR250F Manuel D'atelier Du Proprietaire page 188

1 Starter motor lead
2 Negative battery lead
3 Wire harness
4 Clamp
5 Taillight lead
6 Coolant reservoir breather hose
7 Coolant reservoir hose
8 Positive battery lead
9 Starting circuit cut-off relay
0 Battery
All manuals and user guides at all-guides.com
CABLE ROUTING DIAGRAM
2 - 109
È Position the starter motor lead, negative battery lead and wire
harness in the tank damper slit.
É Fasten the wire harness.
Ê Do not allow the taillight lead to slacken.
Ë Fasten the coolant reservoir breather hose, coolant reservoir
hose and rectifier/regulator lead.
Ì Fasten the coolant reservoir breather hose and coolant reser-
voir hose.
Í Pass the coolant reservoir hose on the outside of the coolant
reservoir breather hose.
SPEC