Burkert 8695 Manuel D'utilisation page 51

Type 8695
DeviceNetinstallation
Procedure:
noTe!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
→
Open the control head: turning the transparent cap anti-clockwise.
Figure 43: Open control head
→
Set the DIP switches according to the following tables.
noTe!
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674078
Settings of the Devicenet address
MAC ID - Medium Access Control Identifier:
[DIP 1=off=0 / DIP 1=on=1 / MAC ID=DIP 1*2
Dip 1 Dip 2
[20=1] [21=2]
off off
on off
off on
... ...
off on
on on
Table 15: Settings of the DeviceNet address
The assembly tool (674078) is available from your Bürkert sales office.
9)
All manuals and user guides at all-guides.com
Transparent cap
Body casing
Connection housing
Actuator
).
9)
+DIP 2*2
0
Dip 3 Dip 4
[22=4] [23=8]
off off
off off
off off
... ...
on on
on on
+...+DIP 6*2 ]
1 5
Dip 5 Dip 6
[24=16] [25=32]
off off
off off
off off
... ...
on on
on on
english
mac iD
0
1
2
...
62
63
51