Burkert 8695 Manuel D'utilisation page 35

Type 8695
Electricalinstallation24VDC
9.4 Display and control elements 24 V Dc
Status LED yellow
Figure 23: Description LED and Jumpers - 24 V DC
noTe!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
Figure 24: Open control head
noTe!
Damage or malfunction due to penetration of dirt and humidity.
▶ To observe degree of protection IP65 / IP67, screw the transparent cap in all the way.
9.4.1 status leD yellow
leD yellow
flashing Teach function is running
Puck not available
flickers
→
Insert puck
Table 4: Status LED yellow - 24 V DC
9.4.2 Valve leD yellow
The yellow LED (valve) indicates whether the pilot valve is actuated (LED is lit yellow).
All manuals and user guides at all-guides.com
Transparent cap
Body casing
Connection housing
Actuator
End position LED green
Jumper for
assignment of
end position LEDs
End position LED yellow
Valve LED yellow (pilot valve)
english
35