Arneg Perth 6P Manuel D'installation Et De Service page 64

Perth 6P - Pelican 6P
English
30. 4 Replace the rail light (optional)
1. disconnect the power supply
2. remove the screws
30. 5 Remove the honeycomb
1. remove the trays
30. 6 Locking the doors (BT version)
i
To release the door, force it while it is closing.
60
3. remove the light assembly
2. remove the screws
3. remove the back panels
1. open the door
4. extract the light
5. install an identical light
6. reconnect the power supply
4. remove the honeycomb
2. Lock the door stop spring
as indicated
05060216 00 06-2022