Publicité
Les langues disponibles
Les langues disponibles
The installati on
• comply with the local standards in force
• comply with the environmental climati c class chap.8
area
• include fl ooring capable of supporti ng the weight of the cabinet
• be equipped with a switch with automati c protecti on against short circuits, earth
must
• provide the necessary space for correct air circulati on, use and maintenance
Conditi ons
For the cabinet to work properly, the room temperature and relati ve humidi-
ty must not exceed the limits of climate class 3 (+25°C; R.H. 60%) according to
environmental
standard EN ISO 23953-2.
Receiving the
• ensure the packing is intact and that it does not display readily apparent dam-
cabinet
• perform the unpacking operati on carefully in order not to damage the cabinet
• check that the cabinet components are intact
• should you noti ce any damage, inform the manufacturer immediately.
Installati on proce-
dure (Fig.5)
What to avoid
i
For correct disposal, the package consists of:
wood - polystyrene - polythene - PVC - cardboard.
16. Electrical connecti on
DANGER! Live parts. Electrocuti on.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
Ensure that the casing does not come into contact with the electrical panel.
Provide a suitable grounding system!
05060216 00 06-2022
discharge and leakage circuit between the electric power line and the cabinet
(Fig.15).
age
Step
lift the cabinet safely
1
use suitable scissors to cut the clip ti ghtening straps-A-
2
remove the clips and the frame
3
lower and place the cabinet in the area of use
4
adjust the horizontal positi on of the cabinet using a spirit level (Fig.10)
7
check that all feet are into contact with the fl oor
8
level the cabinet both at the front and at the back
9
gently remove the protecti ve fi lm, eliminate glue residues with suitable
10
solvents
carry out the fi rst cleaning using neutral products and a soft cloth.
11
Install maximum 3 cabinets within the same power supply and cooling
line
If the cabinet is moved, repeat the levelling check - incorrect levelling will
impair the functi on of the cabinet
• DO NOT use alcohol to clean the methacrylate parts (Plexiglass)
• DO NOT use abrasives or metal sponges
• DO NOT install the cabinet (Fig.9):
- in areas at risk of explosion
- in open air and therefore exposed to the elements
- near heat sources (direct sunlight, heati ng systems, incandescence
lamps, etc.)
- in the vicinity of air currents (close to doors, windows, air-conditi on-
ing systems, etc.) that exceed a speed of 0.2 m/s
• Dragging. Sagging/deformati on/tearing
DO NOT drag/push the cabinet
Follow the instructi ons for safe handling.
Perth 6P - Pelican 6P
Acti on
English
47
Publicité
