Arneg Perth 6P Manuel D'installation Et De Service page 63

16. Perth 6P 1E: join the
uprights of the tray L
30. 2 Replace the frame lights
1. disconnect the power cable
30. 3 Replace the tray lights
1. disconnect the power supply
2. use a screwdriver to lever on
the clips
05060216 00 06-2022
17. Perth 6P: join the rear bra-
ckets O
2. release the light
3. release the light
Perth 6P - Pelican 6P
18. join the glazing profiles N
3. install an identical light
4. reconnect the power supply
4. install an identical light
5. reconnect the power supply
English
59