Steca Grid Vision Manuel page 48

48
All manuals and user guides at all-guides.com
Language
A list of languages supported by the remote display is
displayed. The current language is selected. Use the UP
and DOWN buttons to browse through the languages
and select one of these using the SET button.
Country
The country set on all connected inverters is displayed.

Note
If this screen is displayed then the country is
set correctly and cannot be modified anymore.
Contrast
This menu item allows you to set the display con-
trast to one of 5 levels. The selected contrast level is
displayed graphically. Use the UP and DOWN buttons
to select a different level. The modified setting is
immediately visible so you can see if the new setting
is correct, Pressing the SET button confirms the new
setting. Pressing ESC discards the new setting and the
display returns to the previous contrast setting.
Display backlight
This menu item allows you to set a timer defining how
long the display backlight remains switched on when
no commands are entered. This timer is reset each
time a button is pressed.
You use the UP and DOWN buttons to set a period
defined in seconds and then confirm this value by
pressing the SET button. A value of 60 sec. causes
the display backlight to remain on permanently.
EN
734.144 | 10.48