Steca Grid Vision Manuel page 44

8 Main menu
8.1 Querying outputs and yields

Note
In a system with many inverters the large data volume can result in delays of up to 30 s
when switching between the various displays described below.
8.1.1 Output
44
All manuals and user guides at all-guides.com
Pressing the SET button in the System daily
yield or Inverter daily yield screens will bring
you to the main menu. You navigate through the
menu entries using the UP and DOWN buttons. Pressing
the SET button displays the submenu of the currently
selected main menu entry. Pressing the ESC button
brings you back to the menu level above. Pressing the
ESC button in the main menu will return you to the
System or Inverter screen.
The Power submenu allows you to display the output
of the entire system or individual inverters
1)
Only in systems with more than 1 inverter
System
This screen shows the total output of the system by
summing the output of all inverters. This corresponds
to the output value displayed in the System screen.
Inverter
This screen shows the output of the selected inverter.
You can now use the UP and DOWN buttons to select
each inverter in turn.
EN
.
1)
734.144 | 10.48