Steca Grid Vision Manuel page 43

EN
7 Switching on
7.1 System daily yield
7.2 Inverter daily yield
734.144 | 10.48
All manuals and user guides at all-guides.com
When the power supply is connected to the remote
display it first displays the start logo and then the
System daily yield screen.
If a malfunction exists then the Steca logo remains
visible.
The System daily yield view provides an over-
view of the current state of all inverters. The current
summed output of al inverters is displayed at the
upper left of the screen. The yield for the current day
(E-Today) and the total yields (E-Total) are displayed at
the upper right of the screen. The yield curve for the
current day is displayed in the middle of the screen.
The yield curve allows you to see what yields were
achieved at what times of the day. At the lower left
of the screen is an indication of how many of the
addressed inverters are currently active and feeding
electricity into the mains grid. The current date and
time are displayed at the lower right of the screen.
An hourglass symbol is displayed if not all values are
available because the remote display has not yet que-
ried all values from all inverters.
An appropriate message is displayed if communication
with one or more inverters is not possible.
If a device, e.g. a PC, is connected to the USB interface
of the remote display then the message USB mode
active is displayed. The remote display cannot query
any values from the inverters while the device is con-
nected to the USB port.
You can display the daily yield of a selected inverter.
From the System daily yield screen, use the UP
and DOWN buttons to select the Inverter daily
yield screen and press SET. You can now use the UP
and DOWN buttons to select each inverter in turn.
The particular inverter selected is displayed in the daily
curve.
If the selected inverter cannot be queried then the
message Inverter not available is displayed.
If a device, e.g. a PC, is connected to the USB interface
of the remote display then the message USB mode
active is displayed. The remote display cannot query
any values from the inverters while the device is con-
nected to the USB port.
Pressing the ESC button returns you to the System
screen.
43