Publicité
Les langues disponibles
Les langues disponibles
EN
6
Commissioning
Note
No specific sequence needs to be followed when connecting the power supply to the
remote display and the data cables between the remote display and the inverters.
6.1
Power supply
The power supply must satisfy the following conditions:
√
Rated voltage: 1 V ±0 %
√
Maximum power consumption: ≤ 4 W
The mains adapter plug supplied with the device satisfies these requirements.
Connecting the power supply
CAUTION
Danger of damage or malfunction.
The COMBICON plug supplied may only be connected by qualified electricians.
Connect the mains adapter plug to the DC socket
or
connect an external power supply to the COMBICON socket using the COMBICON
plug provided.
Note
The power supply inputs are reverse-polarity protected. If the external power supply is
connected with reverse polarity then the display remains dark.
6.2
Data connection
Connect the remote display to the first inverter using the cable provided or an
alternative cable. More information on this is provided in the StecaGrid 10000 3ph
manual, issue Z04 or later.
734.144 | 10.48
All manuals and user guides at all-guides.com
39
Publicité
