Publicité
Les langues disponibles
Les langues disponibles
4
Installation
4.1
Installation
WARNING
Risk of electrical shock and fire if mounted in a damp environment!
The mounting location must conform to the protection degree of the device; see section
Technical Data.
CAUTION
Danger of bodily injury and damage to the casing when drilling!
Do not use the case as a drilling template.
1.
Choose a suitable installation site.
.
Drill the upper fastening hole.
3.
Screw in the screw.
4.
Hang the case in the recess and align it correctly.
5.
Mark the position of the lower fastening holes ‚ / ƒ.
6.
Remove the case.
7.
Drill the lower fastening holes.
8.
Hang the case in the recess .
9.
Screw the case firmly using the lower fastening holes ‚ / ƒ.
4.2
Deinstallation
To deinstall the remote display, follow the installation instructions in the reverse
order. If necessary re-terminate the data bus.
36
All manuals and user guides at all-guides.com
2
1
3
EN
734.144 | 10.48
Publicité
