Steca Grid Vision Manuel page 57

EN
734.144 | 10.48
All manuals and user guides at all-guides.com
Colliding country codes: System shutdown
This message means that at least two inverters are
set to different countries and cannot feed the mains
grid for legal reasons. This is typically the case when a
system contains inverters that were previously used in
other countries.
The country selection displays the set countries in
English: Example:
Inverter 1 is set to Germany.
•
Inverter  is set to United Kingdom.
•
If a third inverter with Spain set as the country is also
present then Spain will also be displayed.
1. Use UP / DOWN to select a country.
Note: If your country is not displayed then select
a country with values as close as possible to your
country; see the StecaGrid 10000 3ph manual.
. Press SET. The confirmation message is displayed
(Fig. left).
3. Select Confirm.
4. Press SET. The System daily yield screen is
displayed.
57