Publicité
Les langues disponibles
Les langues disponibles
5.1.3
Cable connections
Up to 0 inverters can be connected to the remote display. Communication between
the remote display and the inverters takes place using a wired connection over an
RS485 bus. Information on the cables to be used is provided in the StecaGrid 10000 3ph
manual, issue Z04 or later.
5.2
Function
5.2.1
Operating buttons
Button
(UP button)
SET
ESC
(DOWN button)
Tab. 5:
Functions of the operating buttons
5.2.2
Settings
•
Date / time of the internal clocks of the remote display and inverters
•
Country: Setting the country also defines the local regulations for feeding electric-
ity into the mains grid. This setting affects all connected inverters and, due to mains
grid feed safety regulations, this setting can be performed only once.
•
Addresses of the inverters
•
Language used for displaying text messages in the remote display
•
Contrast / illumination of the display
5.2.3
Display
The following information stored in the inverters can be read on the remote display:
•
Output and yields
–
of all inverters
–
of individual inverters
•
Numerical and graphical display
38
All manuals and user guides at all-guides.com
Function
•
Scrolling up through the menu
•
Increases a selected value
•
Enters a selected submenu
•
Confirms an entered setting
•
Jumps one menu level upwards
•
Discards an entered setting
•
Scrolling down through the menu
•
Decreases a selected value
EN
734.144 | 10.48
Publicité
