nVent RAYCHEM WinterGard Cable 230V Mode D'emploi page 18

Installing the temperature and moisture sensor
Install the temperature and moisture sensor in accordance with the instructions supplied with the unit. Ensure that it
EN
is supported at the correct height.
DE
FR
PL
CZ
RU
NL
SV
NO
FI
• The sensor lead should be routed under the layer with the heating cable.
• The sensor should be placed mid-way between heating cable runs.
• The sensor lead should be protected by a conduit (4).
Sensor
|
18 nVent.com/RAYCHEM
Heating
cable
=
50
50 mm
mm
Sensor
Concrete, asphalt or
Sensor housing
paving bricks
Surface Sensor
=
50
50 mm
mm
Heating
cable
Conduit
Filling material
Sub surface