Device Status - Assignment Of The Leds - Burkert 8691 Manuel D'utilisation

Bus leD red and green
The red and green LEDs (bus) indicate the bus status:
leD green leD red
off
off
on
flashing
off
flashing
Table 10: LED Status display bus status
noTe!
Damage or malfunction due to penetration of dirt and humidity.
To ensure degree of protection IP65 / IP67:
▶ Screw the transparent cap in all the way.
10.6.2 Device status - assignment of the leDs
The device status of the control head (transparent cap) is displayed optically by colored high-power LEDs (Top
LEDs).
The following functions are shown as standard
color
green Top LEDs on
yellow Top LEDs on
red LED flashing
alternately with the green or
yellow Top LEDs
Table 11: Assignment of Top LEDs - AS-Interface
42
off POWER OFF
on No data traffic (expired Watch Dog at slave address does not equal 0)
off OK
on Slave address equals 0
flashing Sensor supply overloaded or external reset
flashing Teach function error (periphery error)
Device status
End position bottom
End position top
no data traffic
or
Teach function error
english
Type 8691
AS-Interfaceinstallation