Device Status Display - Assignment Of The Top Leds - Burkert 8691 Manuel D'utilisation

Type 8691
Electricalinstallation24VDC
9.5.2 Device status display - assignment of the Top leDs
The device status of the control head (transparent cap) is displayed optically by colored high-power LEDs (Top LEDs).
noTe!
Breakage of the pneumatic connection pieces due to rotational impact.
▶ When unscrewing and screwing in the transparent cap, do not hold the actuator of the process valve but the
connection housing.
Top LEDs
Figure 26: LED status display
The following functions are shown as standard:
color
green Top LEDs on
yellow Top LEDs off
Table 5: Assignment of Top LEDs - 24 V DC
noTe!
Damage or malfunction due to penetration of dirt and humidity.
To ensure degree of protection IP65 / IP67:
▶ Screw the transparent cap in all the way.
Device status
End position bottom
End position top
Connection housing
english
33