General Notes; Symbols; Safety Notes; Scope Of Delivery - Burkert 2012 Instructions De Service

Masquer les pouces Voir aussi pour 2012:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GENERAL NOTES

Symbols

The following symbols are used in these operating instructions:
marks a work step that you must carry out
ATTENTION!
marks notes on whose non-observance your health or the functioning of the device will
be endangered.
NOTE
marks important additional information, tips and recommendations.

Safety notes

Please observe the notes in these operating instructions together with the conditions of use and
permitted data that are specified in the data sheets of valve, in order that the device will function perfectly
and remain operable for a long time:
Keep to standard engineering rules in planning the use of and operating the device!
• Installation and maintenance work are only allowed by specialist personnel using suitable tools!
• Observe the current regulations on accident prevention and safety for devices during operation and
maintenance of the device!
• Switch off the supply voltage in all cases before intervening in the system!
• Note that in systems under pressure, piping and valves may not be loosened!
• Take suitable precautions to prevent inadvertent operation or damage by unauthorized action!
• On non-observance of these notes and unauthorized interference with the device, we will refuse all
liability and the warranty on device and accessories will become void!

Scope of delivery

Immediately after receipt of a shipment, make sure that the contents are undamaged and match the
scope of delivery stated on the packing slip. If there are discrepancies, please contact immediately your
Bürkert subsidiary or our customer service:

Warranty conditions

This document contains no warranty statements. In this connection we refer to our general sales and
business conditions. A prerequisite for validity of the warranty is use of the device as intended with
observance of the specified conditions of use.
ATTENTION!
The warranty covers only faultless condition of valve Type 2012. No liability will be
accepted for consequent damage of any kind that may arise from failure or
malfunctioning of the device.
2 - 2012
Bürkert Fluid Control Systems
Chr.-Bürkert-Str. 13-17
Service Department
D-76453 Ingelfingen
Tel: (07940) 10-111
Fax: (07940) 10-448
E-Mail: info@de.buerkert.com

Publicité

Table des Matières
loading

Table des Matières