Installation In The Pipeline; Operation And Function; Safety Instructions; Operation Of The Ball Valve - Burkert 2651 Manuel D'utilisation

7.2 Installation in the Pipeline
Procedure:
→
Check that the pipes which are to be connected to the ball valve are
on one level. This will prevent mechanical tension on the screw joint.
→
Screw the ball valve to the pipe.
→
Check that the ball valve is firmly attached to the pipe to ensure
appropriate tightness.
10
english
Types 2651, 2654, 2660,
Operationandfunction
8 OPERATION AND FUNCTION
8.1 Safety instructions
WARNING!
Danger due to improper operation!
Improper operation may result in injuries as well as damage to the
device and the area around it.
▶ The operating personnel must know and have understood the
contents of the operating instructions.
▶ Observe the safety instructions and intended use.
▶ Only adequately trained personnel may operate the equipment/
the device.
8.2 Operation of the ball valve
Via the mechanical interface as per ISO 5211, the ball valves can be
connected to a pneumatic rotary actuator (e.g. Types 2050 or 2051)
or an electric rotary actuator (e.g. Types 3003, 3004 or 3005).
TKU 001