Motorola WAVE Mobile TLK 150 Mode D'emploi page 34

MN007262A01-AE
Chapter 3 : Accessories Installation
Figure 21: External Speaker Mounting
Label
1
2
3
4
5
3.3
Installing External Speaker
When and where to use: External Speaker (Motorola Solutions part number AC000240A01_) cable
connects to a 16-pin MAP connector kit (Motorola Solutions part number HLN9457_).
Procedure:
1 Connect two lead of wires with crimped contact to Pin 16 (Speaker +) and Pin 1 (Speaker-).
Polarity is not important.
2 Connect Pin 15 (GPIO_9) to Pin 7 (Ground) for external speaker detection.
3 Plug the 16-pin MAP connector kit to the center of Rear Mobile Accessory Port (MAP)
Connector.
34
1
2
Description
Dashboard
Firewall
Can be mounted permanently on dashboard.
Can be mounted permanently in firewall areas.
Trunnion Bracket
5
3
4