Motorola WAVE Mobile TLK 150 Mode D'emploi page 27

5 To install the LTE antenna, remove the adhesive tape protective layer at the bottom of the
antenna surface and adhere the antenna on the dashboard or on the internal surface of the
windshield as an alternative.
6 To install the GNSS antenna, perform one of the following actions:
NOTE:
Ensure the LTE antenna and the GNSS antenna are 30 cm apart.
You can install the antenna on the dashboard or on the internal surface of the windshield
as an alternative.
• To install the GNSS antenna on the dashboard, attach the adhesive film (red) at the bottom
side of the antenna. Remove the protective layer on the adhesive film (red) and adhere the
antenna on the dashboard.
Figure 15: GNSS Antenna Installation On The Dashboard
Label
1
2
• To install the GNSS antenna on the internal surface of the windshield, attach the adhesive
film (red) at the top side of the antenna, and decorative film (black) at the bottom side of the
antenna. Remove the protective layer on the adhesive film (red) and adhere the antenna on
the windshield.
Chapter 2 : Installation Details for Standard Configurations
1
2
Description
Windshield
Dashboard
MN007262A01-AE
27