MN007262A01-AE
Introduction
Chapter 1
Introduction
This manual covers the installation procedures for Mobile Radios and accessories required to complete
the radio system.
1.1
Mobile Radio Description
This chapter covers the basic dimensions of the dash mount trunnion of the mobile radio.
1.1.1
Dimensions
When installing the radio, plan the installation carefully. Leave room for cabling and accessory
connections in the installed location. For the installation of the radio into the trunnion, use the
appropriate hardware.
NOTE: The measurement unit used is millimeter unless otherwise stated.
Figure 1: Front View of Dash Mount Trunnion
207.20
175.60
Figure 2: Side View of Dash Mount with Low Porfile Trunnion
99.7
94.62
43.18
60.96
11