Motorola WAVE Mobile TLK 150 Mode D'emploi page 29

MN007262A01-AE
Chapter 2 : Installation Details for Standard Configurations
2.8.1
Standard Hang-Up Clip
The hang-up clip must be within reach of the operator(s). Measure this distance before actually
mounting the bracket. Since the bracket has a positive-detent action, the microphone can be mounted
in any position. The microphone hang-up clip must be grounded.
Use the hang-up clip as a template to locate the mounting holes. To avoid interference when removing
the microphone, install the flathead screw in the top clip hole.
2.9
Completing the Installation
Connect the power wires and plug in the microphone cable to the mobile radio to complete the
installation.
29