Tunturi C80-R Manuel De L'utilisateur page 26

English
Gender
- Turn jog wheel and select "Gender"
- Press jog wheel to open "Gender" edit
- Turn jog wheel to select Male/ Female
- Press jog wheel to confirm and go back to Edit user
Menu
Age
- Turn jog wheel and select "Age"
- Press jog wheel to open "Age" edit
- Turn jog wheel to change age
- Press jog wheel to confirm and go back to Edit user
Menu
Height
- Turn jog wheel and select "Height"
- Press jog wheel to open "Height" edit
- Turn jog wheel to change Height
In cm when units in Metric
In ft/inch when units in Imperial.
- Press jog wheel to confirm and go back to Edit user
Menu
Weight
- Turn jog wheel and select "Weight"
- Press jog wheel to open "Weight" edit
- Turn jog wheel to change Weight
In kg when units in Metric
In lbs when units in Imperial.
- Press jog wheel to confirm and go back to Edit user
Menu
Max HR
- Turn jog wheel and select "Max HR"
- Press jog wheel to open "Max HR" edit
- Turn jog wheel to change default max HR preset as:
when selected Male : 220-age
when selected female
- Press jog wheel to confirm and go back to Edit user
Menu
Delete User
By selecting the "Delete User" you can:
Delete a user and all its data.
- Turn jog wheel and select the user you want to
delete
- Press jog wheel to delete the selected user and go
back to setting menu.
NOTE
• User will be deleted without further prompting
: 226-age
2 6
Change user
By selecting the "Change User" you can:
- Select an other pre-set user profile.
- Turn jog wheel and select the user you want to
activate
- Press jog wheel to confirm the selected user and go
back to setting menu.
Create user
By selecting the "Create User" you can set up a new
user profile. Maximum of 8 users can be installed.
See Edit user on how to create user.
Mode BT (Bluetooth)
Rotation the jog wheel button to choose BT Mode ,and
press the button into BT mode.
BT Connection
The Bluetooth Module will be turned on and connect
BT device automatically when being in this mode.
Press the jog wheel button or back button to leave this
page ,and Bluetooth Module will be turned off.
Cleaning and maintenance
The equipment does not require special maintenance.
The equipment does not require recalibration when
it is assembled, used and serviced according to the
instructions.
WARNING
• Do not use solvents to clean the equipment.
• Clean the equipment with a soft, absorbent cloth
after each use.
• Regularly check that all screws and nuts
are tight.
• If necessary, lubricate the joints.
Defects and malfunctions
Despite continuous quality control, defects and
malfunctions caused by individual parts can occur in the
equipment. In most cases, it will be sufficient to replace