Publicité
Les langues disponibles
Les langues disponibles
-
The cue message in the screen: "Slow down"/
"Speed up"/ "Speed ok" informs the user to
speed up or slow down.
-
When pressing the jog wheel button the program
switch to the next Training Mode without prompt
message.
-
The X axis denote time in minutes between 0~30.
It is updated once every 15 minutes during workout
screen:
-
The Y-axis unit is Nm
-
The bar chart show torque value Nm. Rotate the jog
wheel to adjust the Nm value
-
The white dot line shows current position, which
moves rightward as workout time increases. The
workout screen could show 5-hour data at most
-
The orange curve shows the user's actual heart rate,
which varies as the heart rate frequency goes up
and down
-
The upper right corner of screen shows the final
countdown time of current active Training mode, it
resets when switches to the next Training mode.
-
The bottom left corner of screen shows cue
message: Slow down/ Speed up/ Speed ok to
remind the user to speed up or slow down
-
Press Back/stop, Main menu button to leave the
workout screen
Training mode screen (Fig. 37)
To stop your workout see:
"End your workout"
User settings
Press "User/Settings" button to enter the User/Settings
main menu.
-
Use the jog wheel to select one of the six available
items.
-
Press the jog wheel button for confirmation to enter
the selected item setting screen
User Log
By selecting the "User Log" you can: view the training
data of the selected user.
You can view either the last training session data or a
summary of all the user's sessions. (fig. F-33)
Exit the training data by pressing
BACK/STOP.
User setting
By selecting the "User Setting" you can:
-
Adjust the brightness (Default=50%)
-
Check the total mileages of the machine.
-
Check the total used time for the machine.
-
Check the default firmware and software version of
Console
-
Change language
-
Select button beep sound on(yes) or off (NO)
User setting window. (Fig. F-35)
How to modify settings
-
Turn jog wheel to select changeable item.
-
Press jog wheel to open selected item in right side
of the screen for edit..
-
Turn jog wheel to change value of selected.
-
Press jog wheel to confirm change.
-
Turn jog wheel to select next item, or use Back/
Stop button to go back to setting menu.
Edit User
By selecting the Edit User you can edit: (Fig. F-34)
User name:
Turn jog wheel and select "Name"
Press jog wheel to open "Name"edit.
Turn jog wheel to select letter
Press jog wheel to confirm
Turn jog wheel to select next letter
When name is edit correctly than select "√" to confirm
name and go back to Edit user Menu
Units, Display
-
Turn jog wheel and select "Units"
-
Press jog wheel to open "Units" edit
-
Turn jog wheel to select
Metric:
show units in km/kph/Kcal
Imperial: show units in mile/mph/kcal
-
Press jog wheel to confirm and go back to Edit user
Menu
Display
-
Turn jog wheel and select "Display"
-
Press jog wheel to open "Display" edit
-
Turn jog wheel to select
Count up: preset time/ distance will be counting up
Count Down: preset time/ distance will be counting
down.
-
Press jog wheel to confirm and go back to Edit user
Menu
2 5
English
Publicité
