Scubapro Aladin 2G Mode D'emploi page 97

All manuals and user guides at all-guides.com
3. DIVING WITH ALADIN 2G
3.1 Terminology / Symbols
The information on the display of Aladin 2G
varies depending on the kind of dive and
the dive phase.
3.1.1 General terminology / Display during no-stop phase
Current depth
In metres (feet)
DEPTH DIVE TIME
NO STOP
CNS O %
2
Max depth
Max depth
reached during
the dive
Oxygen toxicity
CNS O %
2
Ascent rate
(Only while
ascending) %
(Max depth
> Temperature
3.1.2 Display during decompression phase
Decompression stop
All required decompression
stops must be observed.
DEPTH DIVE TIME
NO
DECO
STOP
CNS O %
2
Decompression
stop depth
Deepest stage is
displayed.
Decompression stop
duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
SCUBAPRO ALADIN 2G
)
No-stop phase
Dive phase during which surfacing is allowed
Dive time
without stop.
Duration of
the dive (min)
Nitrogen loading Time
bar
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
Current depth
decompression
stop (min).
26.2m
Max depth
37min dive time
Elapsed bottom time
>) Temperature
, O mix and time of day
2
Time
35.7m
No-stop range
Total ascent time
Including decompression
stops in minutes.
3. Diving with Aladin 2G
NOTE: For information about diving
with microbubble (MB) levels see
->37. Specific features of "Diving with
two gas mixtures", are described in
chapter 8 ->48.
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
24min
No-stop time
> (Max depth)...
Total ascent time to surface (7min)
3m
Deepest
6m
decompression
stop depth
2min
Decompression
stop duration
Decompression range
19