Scubapro Aladin 2G Mode D'emploi page 139

All manuals and user guides at all-guides.com
Setting the backlight duration
1. Confirm that you wish to change the
duration of the backlight illumination by
pushing . The value starts to flash.
2. Change the duration with
or push on / push off)
3. Confirm it with
Switching the audible attention signals
on and off
With this option you can switch off the
audible attention signals only (the audible
alarms remain active). Refer to page 20 to
see this distinction.
1. Confirm that you wish to change the
setting of the audible attention signals
by pushing . "On" or "off" starts to
flash.
2. Switch between "on" or "off" by press-
ing .
3. Confirm the setting with
SCUBAPRO ALADIN 2G
Switching the water contacts on and
off
On submerging in water the water contacts
switch on Aladin 2G automatically.
. (2-12s
.
If you chose the option "Water contacts
off", Aladin 2G will turn on with a delay of
up to 1 minute into the dive. This will affect
functioning of the computer.
Make sure that the computer is on before
starting the dive.
1. Confirm that you wish to change the
setting of the water contacts by pushing
2. Switch between "on" or "off" by press-
ing
3. Confirm the setting with
.
11. Settings
WARNING
. "On" or "off" starts to flash.
.
.
61