Scubapro Aladin 2G Mode D'emploi page 111

All manuals and user guides at all-guides.com
4. GAUGE MODE
WARNING
In gauge mode ALL audible and visual alarms
and attention messages are turned off.
In gauge mode Aladin 2G will display depth,
dive time and max depth. By pressing
you can scroll from the max depth to
the temperature, to the average depth,
to the time of day and back to the
max depth. By pressing
restart the stopwatch. This generates
a bookmark. Gauge mode does not
support the calculation of no-stop time
or the supervision of decompression.
Supervision of ppO
will also be switched off. Aladin 2G will
display no information about microbubble
development. The settings for the gas
mixture, MOD and microbubble level
cannot be set and the dive planner cannot
be selected.
Switching the gauge mode on and off
Gauge mode can be switched on and off at
the surface, when there is no desaturation
and no-dive in gauge mode has been made
in the last 48 hours.
WARNING
• Dives in gauge mode are performed at your
own risk!
• After diving in gauge mode you must
wait for at least 48 hours before using a
decompression computer.
After diving in gauge mode, Aladin 2G can
not be used as dive computer for 48 hours.
Procedure:
SCUBAPRO ALADIN 2G
1. From the time of day display push
or
(If Aladin 2G shows " – – – " the gauge
mode cannot be switched "on" or "off".
Aladin 2G shows " – – – " for 48 hours
after a dive in gauge mode and as long
as there is remaining desaturation after
a dive in computer mode.)
2. Confirm with
activate or deactivate the gauge mode.
"deco", "gauge" or "apnea" starts
flashing.
you can
3. By pushing
scroll between: Gauge, Deco (SCUBA
diving) or Apnea. Select: "Gauge".
4. Confirm your settings with
Without confirmation the display will
max and CNS O %
2 2
disappear after 3 minutes and your entries
will not be accepted.
Diving in gauge mode
The following information is displayed in
gauge mode:
Current
Stopwatch
Max depth /
Temperature /
Average depth (AVG)
The average depth is continuously
updated and represents the time averaged
depth since the beginning of the dive.
You can reset the average depth at any
time by pushing
a bookmark.
4. Gauge mode
until the "ALGO" is displayed.
that you wish to
or the mode will
.
DEPTH DIVE TIME
Dive
depth
time
Gauge icon
>Temperature
>Average depth (AVG)
>Temperature , Time
>Max depth
. This generates also
33