Scubapro Aladin 2G Mode D'emploi page 145

All manuals and user guides at all-guides.com
Setting the Surface Interval warning
With this alarm you can set a time for
recovery or start time for repetitive dive
when training against given tables.
1. Confirm that you wish to change the
settings of the Surface Interval warning
by pushing . Time value starts to
flash.
2. Scroll time value with
3. Confirm the surface time with
On/off starts to flash.
4. Switch between on/off with
5. Confirm the setting with
Setting the Ascent Speed alarm
With this alarm you can set ascent speed
alarm.
1. Confirm that you wish to change the
settings of the Ascent Speed alarm
by pushing . Time value starts to
flash.
2. Scroll ascent speed value with
.
3. Confirm the maximum ascent speed
with . On/off starts to flash.
4. Switch between on/off with
5. Confirm the setting with
SCUBAPRO ALADIN 2G
Setting the Water Density
With this setting you can get optimized
accuracy on depth reading when you know
the salinity of the water.
1. Confirm that you wish to change the
settings of the Water Density by pushing
. Density value starts to flash.
2. Scroll density value with
or .
3. Confirm the setting with
.
.
.
or
.
.
11. Settings
or .
.
67