Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
1. Confirm that you wish to change the
depth of the alarm or to switch it on or
off by pushing
to flash.
2. Change the depth in increments of
1 m/5 ft by pushing
3. Confirm the selected depth with
"On" or "Off" starts to flash.
4. "On" indicates "activated", "Off"
indicates "deactivated".
switches between "On" and "Off".
Confirm the selected status with
See also page 23.
Setting the dive time alarm
DEPTH
Status
1. Confirm that you wish to change the
time of the dive time alarm or to switch
it on or off by pushing
time starts to flash.
2. Change the alarm time in increments of
5 minutes by pushing
3. Confirm the selected alarm time with
. "On" or "Off" starts to flash.
4. "On" indicates "activated", "Off"
indicates "deactivated".
Switch between "on" or "off" by
pressing
.
Confirm the selected status with
See also page 23,23.
Setting the safety stop duration
Duration of the safety stop
SCUBAPRO ALADIN 2G
1. Confirm that you wish to change the
duration of the safety stop by pushing
. The depth starts
2. Change the duration in increments of
1 minute or to off (inactive) by pushing
or
.
.
3. Confirm the selected duration with
Setting the maximum partial pressure
of oxygen (ppO
.
DIVE TIME
1. Confirm that you wish to change the
ppO
2
rent value starts to flash.
2. Change the value in increments of
0.05bar by pushing
3. Confirm the selected value with
The ppO
Alarm time
the deco gas.
Setting the time limit to reset the O
. The alarm
mix to air
or
.
Time limit to reset O
.
1. Confirm that you wish to change the
time limit of the reset by pushing
The current setting starts to flash.
2. Change the time limit by pushing
or
(1 - 48hrs or no reset: "– – h")
3. Confirm the selected value with
11. Settings
. The duration starts to flash.
or
.
.
max)
2
ppO
max
2
max by pushing
. The cur-
or
.
.
max setting is valid for gas 1 and
2
%
2
mix to air
2
.
.
.
59
Publicité
