Scubapro Aladin 2G Mode D'emploi page 142

All manuals and user guides at all-guides.com
11. Settings
Adjusting the time of day
Time of day
You can adjust it to your time zone either
in this menu or using the UTC offset (see
above).
1. Confirm that you wish to adjust the time
of day by pushing
The hours start to flash.
2. Set the hours by pushing
3. Confirm the setting with
minutes start to flash.
4. Set the minutes by pushing
.
5. Confirm the setting with
Selecting 24 hours or AM/PM setting
1. Confirm that you wish to change the
setting by pushing
starts to flash.
2. Switch with between "on" (AM/
PM) and "off" (24h).
3. Confirm the setting with
The 24h - AM/PM setting influences the
display of the date (see below).
64
Adjusting the date
.
or .
. The
1. Confirm that you wish to adjust the date
by pushing
or
The first day (month) starts to flash.
2. Set the day (month) by pushing
.
.
3. Confirm the setting with
month (day) starts to flash.
4. Set the month (day) by pushing
.
5. Confirm the setting with
starts to flash.
6. Set the year by pushing
7. Confirm the setting with
Adjusting the display contrast
. "On" or "off"
.
1. Confirm that you wish to adjust the
display contrast by pushing
The current setting starts to flash.
2. Set the contrast by pushing
.
Low contrast: (1), high contrast: (12)
3. Confirm the setting with
Date (24h setting)
Day / Month / Year
Date (AM/PM setting)
Month / Day / Year
.
or
. The
or
. The year
or .
.
.
or
.
SCUBAPRO ALADIN 2G