Scubapro Aladin 2G Mode D'emploi page 103

All manuals and user guides at all-guides.com
• Display of the ascent rate has the
priority over "CNS O
WARNING
Ascent rate Visual alarm
S
L
%
O
W
S
L
%
O
W
S
L
%
O
W
S
% L
O
W
Reduce ascent rate
Excessive ascent rates for longer periods
are entered in the logbook.
The following ascent rates correspond to
the 100% value in Aladin 2G.
depth (m) speed (m/min)
<6 7
<12 8
<18 9
<23 10
<27 11
<31 13
<35 15
<39 17
<44 18
<50 19
>50 20
SCUBAPRO ALADIN 2G
3.4.7 Partial pressure of oxygen
".
2
Audible alarm
The maximum partial pressure of oxygen
ppO max (default 1.4bar) determines the
2
Maximum Operating Depth (MOD). Diving
depth (ft) speed (ft/min)
deeper than the MOD will expose the diver
<20 23
to oxygen partial pressures higher than the
<40 26
set maximum level.
<60 29
The ppO
<75 33
can be reduced manually (->21, setting the
<88 36
gas mixture, point 5).
<101 43
In addition the maximum allowed ppO
<115 49
be set by means of SmartTRAK or with
<128 56
"set 1" between 1.2 to 1.6 bar ->59.
<144 59
<164 62
>164 66
The MOD is a function of ppO
mixture used. If during the dive the MOD is
reached or exceeded Aladin 2G sends an
audible attention message and the MOD is
displayed (flashing) in the lower left corner.
Ascend to a depth shallower than the displayed
MOD in order to diminish the danger of oxygen
poisoning.
The MOD should not be exceeded. Disregarding
the warning can lead to oxygen poisoning.
3. Diving with Aladin 2G
(ppO max) / Maximum
2
Operating Depth (MOD)
4s
DEPTH DIVE TIME
NO STOP
CNS O %
2
Max Operating Depth MOD
max and consequently the MOD
2
can
2
WARNING
max and the
2
WARNING
25