Scubapro Aladin 2G Mode D'emploi page 121

All manuals and user guides at all-guides.com
6.5 Complete a dive with MB
levels
A dive with MB levels is completed the
same way as a dive without MB levels (L0)
(->29), save for the following exceptions:
If the MB level has been reduced during
the dive, Aladin 2G will display a flashing
MB level symbol and the current MB level
for five minutes after reaching the surface.
The dive is then completed and Aladin 2G
changes to user mode with the MB level
switching back to the original MB setting.
Repetitive dives and MB levels: If during
a dive a level stop is being ignored and
the diver starts another descent shortly
afterwards, Aladin 2G might immediately
request level stops. To complete the dive
with the initially set MB level all level stops
must be observed.
SCUBAPRO ALADIN 2G
6. Diving with microbubble (MB) levels
S
L
O
W
43