Scubapro Aladin 2G Mode D'emploi page 136

All manuals and user guides at all-guides.com
11. Settings
11. SETTINGS
11.1 Altitude adjustment
The altitude adjustment does not affect
altitude ranges nor any calculations.
Setting
• Depth alarm
• Dive time alarm
• Safety stop duration
• Maximum partial pressure of
oxygen (ppO max)
2
• Time limit to reset the O
to air
• Deco gas
• PDIS (Profile Dependent
Intermediate Stop)
• Unit system
• Water type
• Backlight illumination duration
• Audible attention signals
• Water contacts
• Reset desaturation
NO
Starting from the time of day display push
or until "set 1" appears.
Confirm that you wish to enter into the menu
of "set 1" by pushing
Once entered into the menu you can scroll
with and through the menu.
58
Adjust the altitude indication to your current
altitude.
1. Starting from the time of day display
push
symbol and the altitude appear.
2. Confirm that you wish to change the
displayed altitude by pushing
The altitude starts to flash.
3. Change the altitude in increments of
10m / 50ft by pushing
4. Confirm the selected altitude with
11.2 Menu "set 1"
With menu "set 1" or SmartTRAK you
can configure the following items (dive
functions):
Range
5 - 100m (20 - 330ft) on/off
5-195min, on/off
1-5min
1.2-1.6bar
% mix no reset / 1 - 48hrs
2
on/off
on/off
metric/imperial
on (salt water)/off (fresh
water)
2-12s ; push on / push off
on / off (SmartTRAK:
selective)
on / off
on / off
Setting the depth alarm
DEPTH
.
or until the mountain
.
or .
.
Default Page
40m (130ft),off 58
40m (130ft),off 59
3 minutes 59
1.4bar 59
no reset 59
off 60
off 60
60
on (salt water) 60
6s 61
on 61
on 61
no reset 62
DIVE TIME
Status Alarm depth
SCUBAPRO ALADIN 2G