Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
11. Settings
Enabling two-gas diving
1. Confirm that you wish to enable two-
gas diving by pushing
"off" starts to flash.
"On" indicates the deco gas is active,
"off" indicates that only gas 1 will be
used for decompression calculations.
2. Switch between "on" and "off" with
.
3. Confirm your choice with
PDIS (Profile Dependent Intermediate
Stop)
1. Confirm that you wish to enable PDIS
by pushing
. "On" or "off" starts to
flash.
"On" indicates that the PDIS timer will
be automatically activated during the
dive, "off" indicates that PDIS will be
inactive.
2. Switch between "on" and "off" with
.
3. Confirm your choice with
60
Selecting the units
1. Confirm that you wish to change the
units by pushing
. "On" or
units are displayed (m / ft / °C / °F).
2. Push
. "m" or "ft" starts to flash.
3. Switch with
4. Confirm the selected unit with
"°C" or "°F" starts to flash.
5. Switch with
"°F".
.
6. Confirm the selected unit with
Selecting the water type
1. Confirm that you wish to change the
selected water type by pushing
"On" or "off" starts to flash.
"Salt on" indicates salt water, "salt off"
indicates fresh water.
2. Switch with
and "salt off".
Confirm the water type with
.
. The selected
between "m" and "ft".
.
between "°C" and
.
.
between "salt on"
.
SCUBAPRO ALADIN 2G
Publicité
