Alliance Laundry Systems SWD448C Installation/Fonctionnement page 30

Operation
Step 6: Insert Coin(s) or Card
To Insert Money
Insert coin(s) in coin slot. Check pricing as seen on
digital display.
Figure 26
To Insert Card
Insert card into opening.
Figure 27
Step 7: Start Washer
After vend price has been satisfied, push the START
keypad. Door must be closed to start washer.
Figure 28
28
W388I
DRY1927N
SWD9
SWD977N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Indicator Lights
WASH
WASH is lit at the beginning of a Wash cycle and will
remain lit until the Wash cycle is complete.
RINSE
RINSE is lit at the beginning of the Rinse or Extra
Rinse cycle and will remain lit until the Rinse cycle is
completed.
SPIN
SPIN is lit for all Spin cycles.
DOOR LOCKED
DOOR LOCKED is lit whenever the door is locked.
The door cannot be opened when this light is on.
START
START flashes one second on and one second off when
the full vend price has been satisfied.
IMPORTANT: If washer fails to operate properly
after installation, make sure electrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified serviceman
refer to the wiring diagram (located inside of
washer control cabinet), check for broken, loose or
incorrect wiring.
NOTE: Once a cycle has started, the door can only
be opened by first unplugging the power cord and
waiting one minute.
WARNING
To reduce the risk of bodily injury, do not
remove laundry from washer until all lights
are out, and all moving parts have stopped.
W092
802703