Alliance Laundry Systems SWD448C Installation/Fonctionnement page 12

Installation
COLD
HOT
5
1 Water Faucet
2 Fill Hose
3 Plain Rubber Washer
4 Hose Coupling
5 Filter Screens
Figure 2
IMPORTANT: Hoses and other natural rubber
parts deteriorate after extended use. Hoses may
develop cracks, blisters or material wear from the
temperature and constant high pressure they are
subject to.
All hoses should be checked on a monthly basis for
any visible signs of deterioration. Any hose showing
the signs of deterioration listed above should be
replaced immediately. All hoses should be replaced
every five years.
10
1
2 3
4
TLW1976N
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
4
1 Water Faucets
2 Cold Water Connection
3 Hot Water Connection
4 Water Fill Hoses
Figure 3
IMPORTANT: Turn off water supply faucets after
checkout and demonstration. Turn off water supply
whenever there will be an extended period of non-
use.
NOTE: Longer fill hoses are available (as optional
equipment at extra cost) if the hoses (supplied with
the washer) are not long enough for the
installation. Order hoses as follows:
No. 20617 Fill Hose (2.44 m) (8 feet)
No. 20618 Fill Hose (3.05 m) (10 feet)
Risers
Risers (or air cushions) may have to be installed if the
pipes knock or pound when flow of water stops. The
risers are more efficient when installed as close as
possible to the water supply faucets (refer to Figure 4).
1
1 Water Supply Faucets
2 Risers (Air Cushions)
Figure 4
2
WATER
MIXING VALVE
3
SWD631N
SWD631N
2
W005I
W005I
802703