Emergency Stop - Torqeedo Travel 603 Mode D'emploi Abrégé

6 Operation
6.1

Emergency Stop

Risk of death if the Emergency Stop is not triggered!
Death or severe physical injuries may result.
Attach the cord on the magnetic kill switch to the skipper's wrist or to his life
jacket.
There are various options for stopping the Travel system rapidly:
Place the tiller in the Stop position.
Pull off the magnetic kill switch.
Remove the motor cable from the battery.
6.2 Travel mode
6.2.1 Starting a trip
During breaks in a trip, if there are swimmers near the boat while at anchor:
remove the magnetic kill switch in order to avoid unintentionally starting the
Travel system.
page 24 / 140
D A N GER !
ADV IC E
1. 2.
1
Fig. 11: On/Off button Fig. 12:
Starting the motor
1. Switch the motor on by pressing the On/Off button (1) for one second.
2. Place the magnetic kill switch on the tiller.
Magnetic kill switch
V. 1.0 / English
Operation