Publicité
Les langues disponibles
Les langues disponibles
Before
connecting
appliance to the water
network, please read and
follow
the
regulations in force in your
country.
If
the
power
damaged,
it
replaced
manufacturer, its service
centre or by adequately
qualified
personnel
order to avoid any risks.
It
is
recommended
install a residual current
device (RCD) with a rated
residual
current
exceeding 30 mA.
Connect the appliance to a
drinking water main with
pressure
between
MPA and 0.8 MPA (1.5
and 8 bar); see data on
the data plate.
the
applicable
cord
is
must
be
by
the
in
to
not
0.15
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance, not the old
one.
Access to the internal area
is restricted to persons
having
knowledge
practical experience of the
appliance, in particular as
far as safety and hygiene
are concerned.
Never clean the internal area of
the
machine
supply on or with the plug
connected. In any event do not
use water jets or detergents.
English
and
with
power
5
Publicité
