English
8.7
Tea brewing
Place a jug under the hot water outlet pipe (11).
By pressing the T6 key, the corresponding dispensing
solenoid valves are activated until the previously
programmed product quantity (time control) is
reached. The LED corresponding to the button of the
selected TEA dose will be steady on during the whole
hot water dispensing stage.
It is possible to stop the brewing before the
programmed product quantity is reached by pressing
again the dose button used for dispensing the product.
The simultaneous tea or coffee brewing is possible.
34
8.8
Steam dispensing
Slowly rotate the knob of the left or the right vaporiser
tap (1 or 8) to start steam dispensing.
It is possible to rotate the
knob either clockwise or
anticlockwise.
It is possible to dispense steam, tea and coffee
simultaneously.