Publicité
Les langues disponibles
Les langues disponibles
English
8.2.2
Programming coffee dose
with touch display
Access the user menu as described in the "Access to
the user menu" section.
Select the beverage to be programmed using the right
or the left arrow (e.g. single espresso of group 1) and
confirm it with the indicated button.
Insert the desired dose using the plus and minus icons
and confirm it with the indicated button.
To carry out a new programming of the other coffee
doses (if the programming time-out of 1 minute has
not been exceeded), it is sufficient to repeat the same
sequence of operations carried out.
Continuous coffee dose programming
Select the beverage to be programmed using the right
or the left arrow (e.g. continuous coffee of group 1)
and confirm it with the indicated button.
Insert the desired dose using the plus and minus icons
and confirm it with the indicated button.
30
To carry out a new continuous programming of the
other coffee doses (if the programming time-out of 1
minute has not been exceeded), it is sufficient to
repeat the same sequence of operations carried out.
Exit the user menu as described in the "Access to the
user menu" section.
8.3
Programming tea dose (hot
water)
It is possible to modify the timed quantities of tea
doses (by means of the volumetric control) and save
them following these steps:
• Programming tea dose (hot water) with the keypad
• Programming tea dose (hot water) with touch display
8.3.1
Programming tea dose (hot
water) with the keypad
Press the T3 key and keep it pressed for more than 5
seconds. Then check if all the LED lights of the
keypads are switched on while the T3 key is blinking.
If a dose key has already
been set, its LED light will
be turned off.
Publicité
