Gaggia Milano La Giusta Mode D'emploi Et D'entretien page 19

Before connecting
water filter
machine, perform a wash
cycle until the water is
clear. Then connect the
water filter
machine.
Connect the drain cup (F) to the drainage pipe (B).
Should the mains pressure
be higher than 0,5 MPa, a
pressure reducer balanced
for high pressure should
be installed
which any mains pressure
increase does not effect
the output pressure).
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance, not the old
one.
5.2
the
to the
to the
(device in
Connect to an earthing socket which complies with
current legislation.
Electrical connection
Before proceeding
electrical connection,make
sure that the voltage rating
corresponds
indicated on the CE plate
and on the connection
plate on the power supply
cable. Check to ensure
that the electrical supply
line is able to support the
machine load (see chapter
"Technical features").
Check that the power
supply cable is efficient and
that it complies
national and
safety standards.
The user must undertake to
power the
protecting the power line
using a suitable
switch (cut-out)
complies with the legislation
in force in the country itself.
English
with
with that
with
European
machine
safety
that
19