Publicité
Les langues disponibles
Les langues disponibles
English
8.1.3.2 Exiting the user menu
Select "Exiting the barman parameters list" using the
right or the left arrow and confirm it with the
indicated button.
Confirm with the indicated button.
Confirm with the indicated button.
28
8.2
Programming coffee dose
It is possible to modify the quantity of the coffee doses
(by means of volumetric control) and save them by
following these steps:
• Programming coffee dose with keypad
• Programming coffee dose with touch display
Make sure the machine is
not in the stand-by mode;
if
this
deactivate
(see
sect.
stand-by mode").
8.2.1
Programming coffee dose
with keypad
Press the T3 key and keep it pressed for more than 5
seconds. Then check if all the LED lights of the
keypads are switched on while the T3 key is blinking.
If a dose key has already
been set, its LED light will
be turned off.
is
the
case,
this
function
"Deactivating
Publicité
