Publicité
Les langues disponibles
Les langues disponibles
8
FUNCTION / USE AND PROGRAMMING
Introduction
The programming software permits the checking of the
following operations:
• handling 2 coffee groups
• control of four different coffee doses for each group
• simultaneous function of both coffee and tea groups
• volumetric check on coffee doses
• programming other functions (date, time, etc.).
Programming
possible using both keypad
and touch display.
8.1
Access the programming and
maintenance menu
Programming and maintenance activities of the machine
are organized in different menus.
• Display menu
• Stand-by mode
• User menu
8.1.1
Display menu
With the display menu it is possible to read the main
information about the machine, the brewed products
and the alarms, switch on the cup warmer, and set the
date, the time and the language.
The display menu is divided into four screens.
8.1.1.1 Display menu 1
When the machine is switched on with the power
button (see section "Power button"), it switches to
display mode.
Display menu 1
1
can
be
2
3
4
5
6
8.1.1.2 Display menu 2
Press button 6 in order to display the second screen.
Display menu 2
7
8
9
10 Dispensing time of group 1
11 Dispensing time of group 2
12 Beverage brewed from group 2
13 Sliding menu
14 Tea / hot water
15 Dispensing time of tea / hot water
Starting up boiler resistance
Date
Boiler water level
Boiler temperature
Time
Sliding menu
Dose dispensed from group 2
Dose dispensed from group 1
Beverage brewed from group 1
English
25
Publicité
