Gaggia Milano La Giusta Mode D'emploi Et D'entretien page 38

English
Remove the filter (E2) from the filter holder (F2),
immerse the filter and the filter holder in the solution for
some minutes, remove any residuals and then rinse them.
Insert the filter (E2) in the filter holder (F2).
9.2.1.3 Cleaning spout
Prize the spout (D2) by means of a proper tool and
take care not to damage the group seal (B2).
Danger of burning. Before
making any intervention,
make
temperature of the spout
is not too high.
Separate the group seal (B2) from the spout (E2),
immerse them in the detergent solution for some
minutes, remove any residuals and then rinse them.
38
sure the
Clean the seat of the spout (E2) by means of the
supplied brush.
Press the spout (E2), complete with the seal (B2), to
reinsert it into the coffee group.
9.2.1.4 Cleaning the nozzle of the
steam wand
Unscrew the nozzle of the steam wand (4 or 12).
Clean every hole of the nozzle by means of a
bottlebrush to remove any residuals.
Screw the nozzle of the steam wand (4 or 12).
9.2.1.5 Cleaning housing
Clean the glass of the front panel with a soft cloth.
Clean the cup holder grill and extensions with a wet
sponge.
Remove the cup holder grill and clean the inner side of
the tray using a sponge.