Publicité
Les langues disponibles
Les langues disponibles
Screw the reflector onto the fitting by turning it clockwise.
•
Replace the front panel.
•
Turn on the power at the main power supply panel.
•
8.7. Maintenance of the spa surface coating
Your spa has a synthetic surface
synthetic surface coating.
synthetic surface
synthetic surface
simply clean the outer spa walls with soapy water and a soft cloth.
8.8. Maintenance of the isothermal cover
Cleaning of the spa cover is an important step in the maintenance of your spa. Dirt
behaves like an abrasive product on the vinyl surface of the cover. As humidity
encourages mould growth, it is essential to remove any mould as soon as it appears
before it penetrates into the material of the cover.
Regularly clean the cover with soapy water. The cover can be cleaned at the same time
as the regular spa maintenance activity. To keep the cover in good condition for as long
as possible, do not drag it along the ground. To avoid dragging the cover, we
recommend the use of a device for folding and storing the cover.
Follow the cleaning procedure below to maintain the cover:
Rinse the cover with running water.
•
Clean the cover with soapy water. Never use abrasive cleaning products or
•
powerful chemical agents.
For persistent stains, use a non-abrasive sponge.
•
Generously rinse with fresh water.
•
8.9. Head rest maintenance
Remove and clean the head rest cushions, as required, using soapy water and a soft
cloth. Do not use detergents or chemical product, which may damage the surface of the
cushions.
coating. The maintenance requirements are minimal:
coating.
coating.
29
Publicité
