Publicité
Les langues disponibles
Les langues disponibles
6.4. Preparing the water
Before using your spa, it is important to understand that water quality preparation is an
important step in spa maintenance. Neglecting to maintain water quality may drastically
reduce the life of the spa components and in certain cases, cancel the validity of your
guarantee.
Your spa is fitted with an ozone purification system. Ozone is a natural oxidant,
recognized for its anti-bacterial and anti-viral properties and used for water disinfection.
However, it is necessary to also add an additional treatment product to ensure product
persistency.
Please carry out water preparation during the filtration cycle or, if this is not in
operation, by activating the pump at low speed to ensure homogeneous distribution of
Before adding chemical products to the water, refer to the water volume table for your
Water capacity
spa in the
Remove the filtration cartridges as indicated in the
•
cartridges section.
Treat the water with an anti- lime scale/sediment inhibitor. This inhibitor
•
prevents the build-up of lime scale encouraged by high water temperatures.
It is a preventive treatment inhibiting the precipitation of scale on the shell
as well as on the equipment and which will optimize future treatment.
1 to 2 hours later, adjust the pH: For ideal disinfection and bather comfort,
•
it is recommended to adjust the pH of the water to between 7 and 7.4 using
pH + or pH - products.
Once the pH is stable (a few hours) disinfect the water using disinfectant
•
tablets.
Permanent disinfection of your Aqualux spa is performed by the ozone generator.
This disinfection must be completed by a persistent disinfectant.
1 to 2 hours later, empty the algaecide into the spa to ensure preventive
•
treatment, stopping the development of algae and reducing the consumption
of disinfectant.
As traces of soap and dirt favour the appearance of foam, it is therefore
•
necessary to use an anti-foaming agent as a preventive treatment to break
the emulsion and stop the appearance of foam..
Replace the filtration cartridges.
•
the products.
section to calculate the correct dose of treatment product.
15
Cleaning filtration
Publicité
